 |
 |
 |
 |
Dual Gauge
This regulator is equipped with Dual Gauge Pressure Indicators. The left gauge measures the content pressure in the cylinder. The right gauge measures the working output pressure. This pressure has been factory set.
German Solenoid Valve
Integrated 110V German Solenoid Valve. This magnetic valve is the ON/OFF switch that supplies power to release CO2 gas. With electricity, CO2 gas supply is ON. A "RED" indicator light will illuminate during operation. Without electricity, CO2 gas supply is OFF. We recommend plugging your lighting system and solenoid valve into the same timer for automatic ON/OFF cycles.
Needle Valve
The Needle Valve is designed for precision adjustments of CO2 gas from the regulator. CO2 flow can be increased by slowly turning the needle valve counter-clockwise to OPEN and clockwise to CLOSE.
Bubble Counter With Check Valve
The regulator includes a bubble counter with a built in check valve. The bubble counter visibly indicates how many bubbles are being released per second. Also included is a built-in check valve that will prevent water from back-flowing into the regulator. This can be easily installed by unscrewing the CO2 output line nut and screwing the female end of the bubble counter to the male end of the CO2 output line.
Solid Copper Construction
This compact and lightweight design comes factory assembled for a quick setup. Compatible with all US tanks from 2.5 lb. - 20lb. gas tanks. These tanks may be purchased at any local welding shop or your local fish shop. |
|
 |
 |
|
 |
|
 |

|